10GFC Fiber Channel SFP+ 1310nm 10km DOM LC SMF
Description
Gigaopto’s GTS-L1395-10DC transceiver features a highly reliable 1310nm DFB transmitter and PIN photo-detector into a duplex LC optical connector.Its max transmission can reach up to 10km over G.652 single mode fiber (SMF).
It is designed for use in 10Gbps serial applications such as SONET OC192/SDH STM64, 10Gigabit Ethernet and 10Gbps Fiber Channel applications. It operates with single +3.3V power supply. The transceiver conforms to the 10Gbps SFP+ multi-source agreement (MSA).
Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
All modules are Class 1 laser products that comply with FDA/CDRH and IEC-60825 standards.
Specification
| Form Factor |
SFP+ |
Max Data Rate |
10.51875Gbps |
| Wavelength |
1310nm |
Max Cable Distance |
10km |
| Connector |
Duplex LC |
Media |
SMF |
| Transmitter Type |
DFB 1310nm |
Receiver Type |
PIN |
| TX Power |
-6~0dBm |
Receiver Sensitivity |
<-14.4dBm |
| Temperature Range |
-5 to 85°C (23 to 185°F) |
Warranty |
3 Years |
| OEM/ODM |
Supported |
DOM |
Supported |
| Protocols |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, RoHS, SFF-8431, SFP MSA |
| Supported Applications |
10GBASE-LR/10GBASE-LW Ethernet
10G Fiber Channel
10GbE Data Center Switches and Routers
|
Features
- Supports up to 10.518Gbps bit rates
- Hot-pluggable SFP+ footprint
- Power dissipation < 1W
- RoHS-6 compliant (lead-free)
- Single 3.3V power supply
- Maximum link length of 10km via single mode fiber
- DFB 1310nm laser
- Receiver limiting electrical interface
- Duplex LC connector
- Built-in digital diagnostic functions
- Commercial temperature range: -5 to 85°C (23 to 185°F)
Application
- 10G Fiber Channel
- 10GbE Data Center Switches and Routers
- 10GBASE-LR/10GBASE-LW Ethernet
Optical Characteristics
| Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
| Transmitter |
| Centre Wavelength |
λc |
1270 |
1310 |
1350 |
nm |
|
| Spectral Width(-20dB) |
Δλ |
|
|
1 |
nm |
|
| Side-Mode Suppression Ratio |
SMSR |
30 |
- |
|
dB |
|
| Average Output Power |
Pout |
-6.0 |
|
0 |
dBm |
1 |
| Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
| Data Input Swing Differential |
VIN |
180 |
|
850 |
mV |
2 |
| Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
|
TX Disable
|
Disable |
|
2.0 |
|
Vcc |
V |
|
| Enable |
|
0 |
|
0.8 |
V |
|
|
TX Fault
|
Fault |
|
2.0 |
|
Vcc |
V |
|
| Normal |
|
0 |
|
0.8 |
V |
|
| Receiver |
| Centre Wavelength |
λc |
1260 |
|
1600 |
nm |
|
| Receiver Sensitivity |
|
|
|
-14.4 |
dBm |
3 |
| Receiver Overload |
|
0.5 |
|
|
dBm |
3 |
| LOS De-Assert |
LOSD |
|
|
-16 |
dBm |
|
| LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
| LOS Hysteresis |
|
0.5 |
|
|
dB |
|
| Data Output Swing Differential |
Vout |
300 |
|
900 |
mV |
4 |
|
LOS
|
High |
2.0 |
|
Vcc |
V |
|
| Low |
|
|
0.8 |
V |
|
Note :
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 231-1 test pattern @10312Mbps, BER ≤1×10-12.
4. Internally AC-coupled.
Compatibility
Gigaopto manufactures and stocks a full range of optical transceivers up to 100G. All of our optical transceiver modules are quality-tested for compatibility with the target switch environment and are 100% compatible with major brands such as Cisco, Brocade, HP, Juniper, Huawei, Alcatel-Lucent, Extreme, Arista, Force10, D-link, 3Com, etc. and offer a 3-year warranty.
For this GTS-L0895-10DC, please refer to the P/N correspondence table. If you need more compatibility, please don’t hesitate to let us know.
| Corresponding Compatible Brand/Part Number |
| Brand |
Part Number |
Brand |
Part Number |
| Gigaopto |
GTS-L1395-10DC |
Cisco |
DS-SFP-FC10G-LW |
| Juniper |
XBR-000217 |
|
|
Product Tags:
|
|
SFP+ 10G FC Fiber Channel 1310nm 10km DOM LC SMF Optical Module Transceiver Images
|
